PC mortars (PC = Polymer Concrete) are understood to be products, which consist of mineral aggregates and reaction resins. Compaed to PCC mortars (PCC = Polymer Cement Concrete), in which cement acts as a bonding agent and the polymer plastic additives only cause property improvement, plastic components are the only binding material in PC mortars.
Mortars, which belong to the HYDROPOX group are 2-component systems with different grain sizes using epoxy resin as a bonding agent. Differentiation is made between the types G = coarse, F = fine and SF = superfine depending on the largest grain size in the aggregate used.
In contrast to conventional PC mortars, which are used in large quantities in road construction for the profiling of road bases, bridge structures etc, HYDROPOX mortars can also be used on moist as well as wet surfaces due to their special bonding agent formulation.
Recommended systems
Use and References
For processing of HYDROPOX mortars the concrete surface has to be primed with HYDROPOX EPG or HYDROPOX FLEX EPG. The mortars are applied “fresh-in-fresh” onto the primer.
HYDROPOX mortars are supplied in combined pails, which contain already A and B component in the right proportion. For mixing of the material, the liquid B-component has to be emptied fully into the solid A-component and stirred thoroughly resulting in a homogenous mixture.
Aktuelle Presseberichte
Bestellen | Abbestellen
23.-26.04.2018
WTC Dubai05.-08.06.2018
BAUMA Russia26.-29.09.2018
35. Baugrundtagung, Stuttgart10.-12.10.2018
Geomechanik Kolloquium, Salzburg