MENU
     
TPH Logo


Injection hoses

Injection is a proven method of sealing against pressurised water in structural renovations. The grouting of injection hoses also provides the benefit of using the advantages of injection technology in new construction specifically for the sealing of construction joints.
MEDIPRESS and VPRESS® injection hoses, which can be injected several times, have been used successfully for construction joint sealing for many years. They can be injected with microfine cement, polyurethane resin or acrylate gel.    
In contrast to passive sealing systems such as conventional water stops and waterstop sheets, which only seal off due to the so-called circumference extension, active systems such as injection hoses and injection grouts can be used to cancel out possible weak points in the concrete caused by cracks or badly compacted concrete.

Sealing and restoration in one step

Single injection with Polyurethane resin

Multiple injection with microfine cement  or acrylate gel

Specially suitable for difficult construction joint run


Recommended systems

Recommended grout

Equipment

hose for bleeding air from injection hoses

screw-in connection

Protective box

shutter-plug

for closing airbleed hoses

  • for hose inner ø 6 mm
  • for hose inner ø 10 mm

Shutter connectors and cover caps

Extension pipe

M 8, Length 35mm, for shutter connectors for cement injection

Plastic clips

for fixing

 

Metal clips

for fixing

Punsh dowel for metal clamp

with hole diameter of 6,1 mm

Fixing clamp

for fixing injection hoses on metal water stops.

Clamp

to fix injectionhoses like MEDIPRESS, VPRESS and ECOPRESS to PVC water stops


Use

Processing

The hoses are fitted in the center of the reinforcement using hose sections of between 8 and 10 m in length. Longer lengths of hose can be achieved, if required due to construction conditions, depending on the grout used.
MEDIPRESS, VPRESS® or ECOPRESS injection hoses and air bleed hoses are joined simply and without tools using screw-in grommets which are screwed into the hoses by hand.
Fixing of the injection hoses is carried out using plastic clips (which can be dowelled or pressed into fresh concrete) or with nail clips. As a rule the venting ends are guided from the construction at right angles. For multiple injection of the injection hoses it is recommendeded either to fit the venting ends with nail packers or to keep them together in storage boxes.

Storage box and nail packers

Nail packers are directly plugged into the venting hose and onto the shell partition. The coloured foam sponges must match the colour of the hose so that the corresponding section of the hose can be identified after the casting of the concrete.

 

 

 


Injection hoses for sealing of biogas plants

 

Flexible sealing system, approved for use in CHF and LMSS plants

References

Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Europapassage, Hamburg
Endoklinik, Hamburg
Endoklinik, Hamburg
Endoklinik, Hamburg
Endoklinik, Hamburg
Endoklinik, Hamburg
Endoklinik, Hamburg
Endoklinik, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Tanzende Türme, Hamburg
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Underground carpark, Bucharest
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Appartment Tower, Marina, Dubai
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck
Sealing with injection hose, landfill Saerbeck


Specials