BOOSTER 10 A
Dual component, stainless steel injection pump with separate rinsing piston for processing acrylate gels.
The conveyance of the material components (A and B component) is implemented by means of a compressed air motor, which drives bothmaterial pistons. This results in a forced pumping capacity of 1:1. The external flushing pump ( for the pumping of water as the flushing agent) is used for the cleaning of the compression head, the injection whip and the packer. In this way, acrylate gels with very low potlife can also be processed reliably.
|Engine gear ratio air motor||~ 1 : 30|
|Working pressure||0 – 240 bar|
|Mixing ratio||1 : 1|
|Volume flow per double stroke||80 ml|
|Maximum flow rate||~ 10 l/min|
|Dimensions||B 50 cm x T 30 cm x H 100 cm|
|Weight||~ 70 kg|
|Effective air demand||450 l/min|
|Compression head||2-link mechanics|