HYDROPOX EP1
Low-viscous 2-component injection resin based on epoxy
- For friction-fit filling of cracks in reinforced concrete structures
- Use also possible on moist substrates
Mixture of A-and B-component | |
---|---|
Processing temperature | 10 – 30°C (substrate temperature) |
Viscosity of mixture (23°C) | ~ 700 – 950 mPas (DIN EN ISO 2555) |
Mixing ratio A : B | 2 : 1 (parts by vol.) 2.27 : 1 (p. b. weight) |
Reaction data at 23°C | |
Pot-life | ~ 30 min (DIN EN 14022) |
Final curing | ~ 7 d |
Properties after curing | |
Bending tensile strength | ~ 29 N/mm2 (DIN EN 12390-5) |
Compressive strength | ~ 85 N/mm2 (DIN EN 12390) |
E-modulus | ~ 2170 MPa (DIN EN ISO 527) |
Tensile strength | ~ 23 N/mm2 (DIN EN ISO 527) |
Elongation at max. ten. force | ~ 1% (DIN EN ISO 527) |