Injection equipment
Well proven, 2 Component Injectionpump, air driven for Polyurethane and Silicate resins
Well proven, 2 Component Injectionpump, air driven for Polyurethane and Silicate resins
2-component injection pump made of stainless steel for the procession of acrylate gels.
TPH INJECT AirPower S25-3K, VA
Small and lightweight stainless steel pneumatic 2K injection pump with external flushing pump for processing acrylic gels.
2-component injection pump made of stainless steel for the procession of acrylate gels.
Small, light 1-component injection pump for processing of polyurethane and epoxy resins.
Small, light, electric 1-component injection pump for processing of polyurethane and epoxy resins.
Battery operated dispenser to effectively handle double chamber cartridges with 1500 ml contents for 2K injection materials
Accu driven, 1K injection machine for fast and easy injections at small or middle size jobs.
Lightweight, pneumatic 1K injection pump for the processing of AQUASTOP.
Manual reciprocating pump
Reciprocating pump for coaxial cartridges
Reciprocating pump for coaxial cartridges
Reciprocating pump for coaxial cartridges incl. ready to use double chamber cartridges and accessories.
Packer
For screw-in the bleeding air hose
for grouting acrylate gels, polyurethane and epoxy resins
for grouting acrylate gels, polyurethane and epoxy resins
Lamella knock-in packer
Injection Equipment
Quadromixer F-connector
- Quadromixer MFQ 08-32D 1:1
- F-connector
- green elements
- white, straight nozzle
- für double chamber cartridge F 1500
Lamella impact packer
- Ø: 18 mm, l: 115 mm
- with internal check valve
- bore diameter 5.8 mm
- connection for Quadromixer-F
Lamella impact packer
- Ø: 14 mm, l: 95 mm
- with internal check valve
- bore diameter 3.9 mm
- connection for Quadromixer-F
Universal adhesive packer
- Ø 50 mm, h: 58 mm
- cross slide valve
- Bore diameter 7 mm
- connection for Quadromixer-F
HP-Hose
Length 2 m
Length 10 m
Coupling Securing Clip
Back-pressure Valve
Ball Valve
T-coupler
Y-piece
Mixing Tube
L=320 mm
Mixing Tube
- L=640 mm
- for the appllication of SOLID SEAL
Static mixer 13-32
- diameter 13 mm
- 32 elements
- KS tube, length 451 mm
- for mixing tube
Mixing element
- LKS mixing element separately, blue
- length 155 mm
- 15 elements
- diameter 12,7 mm
- for mixing tube
Mixing Tube
- L=310 mm
- for the appllication of SOLID SEAL
Mixing Tube
for processing TRACKFIX SIL.
Screw Nipple
Straight Union
Straight Union
Screw-in nipple
Double nipple
Plug socket
Plug fore Soldering
Female Threaded Union
Injection connector
O-Ring
Support ring
Borehole Packer
Screw-in male coupling
Pile block
for G1/4″
Piling injection spear
Pile block
for G3/8″
Injection pipe
Placing tool
forG1/4″
Piling injection spear
Placing tool
for pneumatic hammer
for G3/8″
Injection pipe
Pneumatic hammer
for rent
HDPE pipe
IBC connection hose
Manometer
Pan-Head Nipple
Steel swivel joint
Hose Sealing Cap
Stopper Inner thread M 8
7 mm free passage
for cement injection
Spring Lock
up to 100 bar
Fast click stopper R1/2″
- ball valve R1/2″
- Geka-coupling
Connection Hose for injection
Sliding coupling
for pan-head nipple
Data recording device
for rent
Flat nozzle
Plugging and sealing
Mineral-based rapid bonding cement for rapid curing and plugging during injection
- pot life: approx. 30 Sek.
Mineral-based rapid bonding cement for plugging during injection and for rapid curing
- pot life: approx. 50 sec
Rapid bonding installation cement for plugging during injection and fixing inserts in concrete and brickwork
- pot life: approx. 4 min
Liquid to viscous Polyurethane based adhesive for plugging or fixing adhesion packers.
For sealing off drill holes up to Ø 100 mm as well as big cracks and break outs