PUR-O-RIP PLUS

2-component injection resin based on polyurethane

  • For crack injection in reinforced concrete structures
  • For grouting of injection hoses
  • Slightly foamy in contact with water
  • Solvent-free

Mixture of A-and B-component
Processing temperature5 – 30°C (substrate temperature)
Viscosity of mixture (23°C)~ 200 mPas (DIN EN ISO 2555)
Mixing ratio A : B 3 : 1 (parts by vol.) 2.5 : 1 (p. b. weight)
Reaction data at 23°C
Pot-life~ 3 – 4 h (ASTM D7487)
Final curing~ 7 d
Properties after curing
E-modulus~ 2,7 MPa (DIN EN ISO 527)
Tensile strength~ 1,5 MPa (DIN EN ISO 527)
Elongation at break~ 80 % (DIN EN ISO 527)