HYDROTITE®
Hydrophilic rubber based on polychloroprene
- For constrution joints in structural, civil and construction engineering
- High chemical resistance against sewage, manure and chemicals
Hydrophilic rubber based on polychloroprene
HYDROTITE® CJ-Profile
3-chamber-profile, co-extruded, polychloroprene based profile with non swellable core and hydrophilic rubber made jacket for renovation and sealing of
Main Advantage: compensation of swelling tension development due to internal cavities
HYDROTITE® round profile
Hydrophilic rubber based on polychloroprene for sealing of
Main advantage: pressure waterproofing even in small joint gaps.
HYDROTITE® rectangular profile
Hydrophilic rubber based on polychloroprene for sealing of
Main advantage: low height
HYDROTITE® round profile with neoprene core
Co-extruded, polychloroprene based profile with non swellable core and hydrophilic rubber made jacket for renovation of
Main advantage: can be subjected to high compressive pressure due to internal neoprene core
HYDROTITE® rectangular ridge profile
Water-swelling rubber based on polychloroprene for sealing of
Main advantage: high swelling mass
One component, hydrophilic sealing compound for bonding of hydrophilic rubber
Mastic adhesive and sealing compound for gluing on moist surfaces and even under water.
For cleaning substrates and for bonding dusts and other contamination.
For connection and dilatation joints inside and outside and for permanently elastic sealing.
For priming heavily absorbent surfaces such as weathered concrete, brickwork, aerated concrete, eternit, natural stone, etc.