PROOFMATE® F surface adhesive
System component of the PROOFMATE® FD system. System component of the PROOFMATE® FD system. Single-com-ponent mastic adhesive and sealing compound based on SPO
(SPO = silane terminated polypropylenoxide)
- For surface adhesion of PROOFMATE® FD membrane to the structural component,
- For surface adhesion of film-/film-over-lapping,
- For edge sealing between PROOFMATE® FD membrane and structural element and in addition for overlapping.
Technical Data | |
---|---|
Material basis | SMP |
Consistency | pasty |
Spec. density (23°C) | ~ 1,5 g/cm3 (DIN EN ISO 2811-1) |
Dyn. viscosity (23°C) | ~ 2000 Pas (DIN EN ISO 2555) |
Reaction data at 23°C | |
Processing temperature | 5 – 40°C (substrate temperature) |
pH value | ~15 min (ASTM C679) |
Max. grain size | ~ 3 mm/24 h |
Cured adhesive | |
Tensile strength | ~ 1,3 N/mm2 (DIN EN ISO 527) |
Elongation at break | ~ 350 % (DIN EN ISO 527) |
Shore A hardness | ~ 40 (DIN ISO 7619-1) |
Temp. resistance | -30 bis +80°C |
Adhesion to concrete | > 1,65 N/mm2 (DIN EN 1542) |