BOOSTER 10 A
Dual component, stainless steel injection pump with separate rinsing piston for processing acrylate gels.
The conveyance of A and B components is implemented by a pneumatic motor, which drives both material pistons. This results in a forced pumping capacity of 1:1. The external rinsing pump (for the pumping of water and/or flushing agent) is used for the cleaning of the injection head, whip and packer. In this way, acrylate gels with very low pot-life can be processed reliably.
- For acrylate gels
Technical Data | |
---|---|
Engine gear ratio air motor | ~ 1 : 30 |
Working pressure | 0 – 240 bar |
Mixing ratio | 1 : 1 |
Volume flow per double stroke | 80 ml |
Maximum flow rate | ~ 10 l/min |
Dimensions | B 50 cm x T 30 cm x H 100 cm |
Weight | ~ 70 kg |
Effective air demand | 450 l/min |
Compression head | 2-link mechanics |