HYDROTITE®

Hydrophilic rubber based on polychloroprene

For constrution joints in structural, civil and construction engineering
High chemical resistance against sewage, manure and chemicals

Technical Data Sheet

Technical Data:
Material basis	polychloroprene, vulcanised
Colour	blue (other colours on request)
Spec. density (20°C)	ca. 1,4 g/cm3
Shore A hardness	ca. 50 (DIN ISO 7619-1)
Tensile strength	ca. 3,0 MPa (DIN EN ISO 527)
Elongation at break	ca. 600 % (DIN EN ISO 527)
Water absorption	ca. 800 -1300 Vol.%* (DIN EN ISO 62)
Delay coating	yes

HYDROTITE® CJ-profile

3-chamber-profile, co-extruded, polychloroprene based profile with non swellable core and hydrophilic rubber made jacket for renovation and sealing of

tunnel liner segments
construction joints for tunneling constructions

HYDROTITE® rectangular profile

Hydrophilic rubber based on polychloroprene for sealing of

construction joints in pipe breakthroughs
manure and sewage tanks
steel structures such as storage tanks
catch basins for chemicals
Main advantage: low height

Equipment

QUELLFLEX®

One component, hydrophilic sealing compound for bonding of hydrophilic rubber

Mastic adhesive and sealing compound for gluing on moist surfaces and even under water.

FIX-O-FLEX H

For connection and dilatation joints inside and outside and for permanently elastic sealing.

FIX-O-FLEX primer

For cleaning substrates and for bonding dusts and other contamination.

FIX-O-FLEX PRIMER

For priming heavily absorbent surfaces such as weathered concrete, brickwork, aerated concrete, eternit, natural stone, etc.