SOLID SEAL

High-strength, very fast reacting, non-foaming 2 component injection resin based on silicate

  • For grouting of water bearing cracks being > 0,2 mm
  • For structural filling of cracks
  • For ground and rock stabilization
  • Underpinning of massive structural elements

Mixture of A-and B-component
Processing temperature15 – 30°C (substrate temperature)
Viscosity of mixture (23°C)~ 125 mPas (DIN EN ISO 2555)
Mixing ratio A : B 1 : 1 (parts by vol.)
Reaction data at 23°C
String gel time~ 40 s (ASTM D7487)
Final curing~ 20 min
Properties after curing
Compressive strength~ 55 N/mm2 (DIN EN 12190)
Bending tensile strength~ 25 N/mm2 (DIN EN 12390-5)
E-modulus~ 1200 MPa (DIN EN ISO 527)
Tensile strength~ 14 N/mm2 (DIN EN ISO 527)