TRACKFIX POX
TRACKFIX POX is a rigid 2-component injection resin based on epoxy resin with high mechanical properties especially for track ballast reinforcement in railroad construction.
- Bonding of transitions from ballast superstructure to slab track
- Suitable for full bonding as well as partial bonding I + II
- Ballast slope protection
- Protection against ballast flow
- Protection against flying ballast
- Protection during work on the track
- Position stabilization and/or correction
- Reduction of tamping intervals
- Underpressing and fixing of sleepers
- Easier cleaning of track ballast beds
- Reduction of dust formation during operation
Due to its good flowability, TRACKFIX POX penetrates excellently into the track ballast to be consolidated. The product is applied in dry to maximum matt damp areas.
| Misxing of A- and B-comp. | |
|---|---|
| Processing temperature | 10 – 30°C (component temperature) |
| Mixing viscosity (23°C) | ~ 400 mPas (DIN EN ISO 2555) |
| Mixing ratio A : B | 1,92 : 1 (volume parts) |
| Reaction data at 23°C | |
| Pot life | ~ 30 min (ASTM D7487) |
| Final curing | ~ 7d |
| Properties of the epoxy resin | |
| Compressive strength (7d) | ~ 95 N/mm2 (DIN EN 12190) |
| E-modulus | ~ 190 N/mm2 (DIN EN ISO 527) |
| Flexural strength | ~ 34 N/mm2 (DIN EN 12390-5) |
