Sealing crack injection for tunnels
Acrylate gel
- Adjustable reaction time
- High mechanical strength
Rubber-elastic, 3 C acrylate gel, multi purpose applicable
- Very low viscous with high flexibility
- Very good penetration, even in water filled cracks
- Long term stable. Proven stability of at least 16 years
Adjustable, rapid-reacting acrylate gel
- Very good elongation properties
- for renovation of dilatation joints
Polyurethane resin (PUR-I)
- Flexible hence good movement assimilation
- Penetrates even into haircracks
2-component injection resin based on polyurethane
- Officially approved system
- Proven against water pressure of 7 bars
- Approved for use in CHF and LMSS plants
2-component high flexible injection resin based on polyurethane
- Universal and economical
- highly flexible < -35°C
Injection resin based on polyurethane (SPUR)
2K injection resin on polyurethane basis
Quickly reacting, rigid, 2 C Polyurethane resin
- Stopping of inrushing water
- For filling and solidification of gravities and ground structures
Solid crack injection for a tunnel
Epoxy resin
- Where pulling and pressing force is expected
Low-viscous 2 C injection resin based on epoxy
- for friction-fit filling of cracks in tunnels
- use also possible on moist substrates
Injection cement
- All cements just needs to be mixed with water and do not need to be mixed up during injection
- Cements are ideal for filling of hollows and for structure solidification with compressive load
- Also available in big-bags
Single-component injection material based on extra-fine cement
- Very high compressive-strength
- For injection in cracks above ab 0,2 mm
Ready to use dry mixture.
Grain size 0-0,125 mm
- For injection in cracks > 0.375 mm
- Non shrinking
- Swelling
Curtain injection
Tunnel: Curtain injection
- Waterproof up to 12 bar
- Adjustable to soil conditions
- High chemical resistance
- Long-term tested
- Worldwide references available
Rubber-elastic, 3 C acrylate gel, multi purpose applicable
- Very low viscous with high flexibility
- Very good penetration, even in water filled cracks
- Long term stable. Proven stability of at least 16 years
Adjustable, low viscous rigid acrylate resin with high final strength. Specially to create ground stabilisation
- Low viscous
- Very good penetration
- High final strength
Slowly curing, from ridged to tough elastic, 2K polyurethane resin, which foams up in contact with water
- Groundwater friendly approved