HYDROPOX EP1

Low-viscous 2-component injection resin based on epoxy

  • For friction-fit filling of cracks in reinforced concrete structures
  • Use also possible on moist substrates
Mixture of A-and B-component
Processing temperature10 – 30°C (substrate temperature)
Viscosity of mixture (23°C)~ 140 mPas (DIN EN ISO 2555)
Mixing ratio A : B 2 : 1 (parts by vol.) 2.27 : 1 (p. b. weight)
Reaction data at 23°C
Pot-life~ 30 min (DIN EN 14022)
Final curing~ 7 d
Properties after curing
Bending tensile strength ~ 29 N/mm2 (DIN EN 12390-5)
Compressive strength~ 85 N/mm2 (DIN EN 12390)
E-modulus~ 2170 MPa (DIN EN ISO 527)
Tensile strength~ 23 N/mm2 (DIN EN ISO 527)
Elongation at max. ten. force~ 1% (DIN EN ISO 527)