PUR-O-CRACK® PLUS
2-component injection resin based on polyurethane
- shorter reaction time
- for the elastic crack injection of reinforced concrete parts according to DIN 1504-5
- for crack injection in masonry
- for sealing and consolidation of water-bearing areas in soil and rock
Mixture of A- and B-component | |
---|---|
Processing temperature | 5 – 30°C substrate temperature |
Viscosity of mixture (23°C) | ~ 61 mPas (DIN EN ISO 2555) |
Mixing ratio A : B | 1 : 1 (parts by volume) |
Reaction data at 23°C | |
Pot-life (string gel time) | ~ 40 min (ASTM D7487) |
Properties after curing: | |
E-Modulus | ~ 0,25 MPa (DIN EN ISO 527) |
Tensile strength | ~ 0,60 MPa (DIN EN ISO 527) |
Elongation at break | ~ 220 % (DIN EN ISO 527) |
Shore A hardness | ca. 10 (DIN ISO 7619-1) |