BOOSTER 10 A
Dual component, stainless steel injection pump with separate rinsing piston for processing acrylate gels.
The conveyance of A and B components is implemented by a pneumatic motor, which drives both material pistons. This results in a forced pumping capacity of 1:1. The external rinsing pump (for the pumping of water and/or flushing agent) is used for the cleaning of the injection head, whip and packer. In this way, acrylate gels with very low pot-life can be processed reliably.
- For acrylate gels
|Engine gear ratio air motor||~ 1 : 30|
|Working pressure||0 – 240 bar|
|Mixing ratio||1 : 1|
|Volume flow per double stroke||80 ml|
|Maximum flow rate||~ 10 l/min|
|Dimensions||B 50 cm x T 30 cm x H 100 cm|
|Weight||~ 70 kg|
|Effective air demand||450 l/min|
|Compression head||2-link mechanics|